Description
FuseBox SPDCUKITT2 Type 2 Surge Protection Device Kit
Features of the Surge Protection Devices range
- Devices have indicators to advise end of life of the device
- No resetting of SPD required, the excess voltage is quickly taken to earth, before the rest of the circuits are damaged
- The device meets the requirements of the IEC 61634-1 and EN 61643-11 standards
- The SPD enclosure can be fitted next to any exiting or new consumer unit of any brand where surge protection is required
Type 2 Surge Protection Devices
This Type 2 Surge Protection Device provides superior protection against Transient overvoltages, by diverting the surge to earth within <25ns. And protecting all loads/circuits connected to the consumer unit.
This item is Type 2 Surge Protection Device with 32A MCB & Cables
Features
- Type 2 Single Phase Surge Device + 32A B Curve MCB
- Fully compliant to BSEN61643-11, BSEN62305 & BS7671
- Suitable for domestic/commercial installations
- Space saving 1 module design
- Minimum back-up MCB 32A B curve
- Can be fitted on DIN rail directly into the consumer unit
- Grey colour to match existing circuit protection devices
- Comprises SPDCUT2 SPD module + 32A MCB
- Supplied with E,N&L 6mm cables
- Terminal Capacity 6-16mm2
- Din Rail Mounted
- Installation instructions & device sticker included
- Flag Indication Green = Good Red = Replace
- Suitable for TN, TNC-S, TNC and TT systems.