Description
REPAIRS ON WALLS & CEILINGS
Ready to use on interior surfaces, straight from the tub. It's very easy to sand down and it won't flash or grin, so there's no need to spot prime.
| Code | TTRPTUBGB |
| Surface condition | Interior |
| Task | / |
| Application method | Manual |
| Time between coats | As soon as the filler is dry. |
| Surfaces | Ready To Use Filler can be applied to any substrates either unpainted or painted: - Gypsum plaster, plasterboards/drywall lining - Old painted surfaces, cement, concrete, cellular concrete - Breeze blocks, bricks, stone and primed wood |
| Overcoat with | Ready To Use Filler can be overcoated with any type of filler, paint or wall coating. |
| Maximum recommended application thickness | Up to 1 cm. |
| Mixing rate | Ready to Use. |
| Ready to paint time | 12 to 24 Hours. |
| Working time | No limit. |
| Application tools | Blade. Putty knife. Trowel. |
| Recommended temperature and humidity for application | Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%. |
| Adhesion | Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa. |
| Coverage g/m² (at 1mm thickness) | / |
| IAQ (Indoor Air Quality) classification | A+ |
| Colour when dry | White. |
| Guarantee | Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost. |
| Clean tools with | Water. |
| Pack sizes | Tube 0.33 KG Tub 1.50 KG Bucket 4 KG |
Surfaces
Ready To Use Filler can be applied to any substrates either
unpainted or painted:
- Gypsum plaster, plasterboards/drywall lining
- Old painted surfaces, cement, concrete, cellular concrete
- Breeze blocks, bricks, stone and primed wood
unpainted or painted:
- Gypsum plaster, plasterboards/drywall lining
- Old painted surfaces, cement, concrete, cellular concrete
- Breeze blocks, bricks, stone and primed wood
Directions for use
Do not apply on exterior surfaces.